home *** CD-ROM | disk | FTP | other *** search
- =============================================================================
- SOUNDCARD HELP
-
- The SETD program must be run to choose a sound card option for
- "Walls of Rome". The WALLS batch file will run this program automatically
- the first time you start "Walls of Rome" and allow you to choose before
- loading the game.
-
- Common sound cards are listed, if you do not see your card and it
- is either Adlib or Sound Blaster compatible then choose the appropriate
- match.
-
- Sound drivers are automatically configured to the default values
- for the appropriate card, if you are not using the default or have
- selected a Sound Blaster compatible which uses setting different than
- the Sound Blaster defaults you will need to configure to your specific
- settings. The I/O port setting defaults will appear, choose the
- appropriate port by entering the value, then IRQ default will appear
- and you can type in that value.
-
- If sound problems occur with one of the sound cards listed, please
- check your sound card documentation and be sure it is correctly set up
- before contacting us, run sound board test software when possible to
- determine you have chosen the correct settings. If problems occur with
- a card not listed but that should be 100% compatible to one listed, try
- choosing the PC Speaker options to see if they work and problem may be
- due to a board that is not as compatible as it suggests.
-
- The sound drivers require XMS memory to load, please be sure you
- have at least 2 MB of XMS memory free to load sound drivers and sound
- effects. Please consult the "Troubleshooting" section of your
- Walls of Rome manual for help on freeing up memory or use this HELP
- program and select either memory help or the boot disk maker.
- =============================================================================
- - END OF FILE -
-